TM 55-2200-001-12
Change 3
Sec. 3--Fig. 4 (Rev.-10-1981)
MOTOR VEHICLES, HAULING OR DUMPING, OFF-HIGHWAY TYPE
(WITH PNEUMATIC TIRES)
90,000 LBS. OR LESS--FLAT CARS
Item
No. of Pcs.
Description
A
Brake wheel clearance. See Figure 2, Section No. 1.
B
16
Blocks, Sketch 1. Locate against front and back of each wheel. Secure to floor of car with five
(5) 60-D nails through toe of block and one (1) 60-D nail through each side.
C
16
Blocks, Sketch 3. Locate crosswise of car, against Items "B". Secure to floor of car with three
(3) 40-D nails and two (2) 20-D nails.
D
16
Blocks, 3 in. x 3 in. x 18 in. Locate against Items "C". Secure to car floor with six (6) 40-D nails.
E
8
Blocks, Sketch 2. Locate against inside wheels. Secure to car floor with seven (7) 60-D nails.
F
4
Blocks, 2 in. x 6 in., length to suit. Locate between Items "E". Secure each to car floor with five
(5) 40-D nails.
G
1
1 1/4 in. x .035 in. high tension band. Encircle dump body and frame.
H
4
5/8 in. 6 x 19 IWRC wire rope, length to suit. Locate two (2) at each end of truck. Attach to axle,
frame, or hitch and to stake pockets to provide a 45° angle to truck. When cable is attached to
axle or frame, locate to form a criss-cross to stake pockets.
Notes:
1. If so equipped, foot and hand brakes must be tightly set and levers wired.
See General Rules 1, 2, 3, 4, 5, 7, 9, 15, and 19-B for further details.
F-6
