Sec. 3--Fig. 5
TWO WHEEL DUMP CART (WITH PNEUMATIC TIRES), LENGTHWISE-FLAT CARS
Item
No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2., Sec. 1.
B
14
Blocks, pattern 2. Locate three against front and back of each wheel and one against each side
of frame. Nail each to floor with two 60-D, three 40-D and one 20-D nail in heel of block and
one 40-D nail in each side of block.
C
4
Blocks, pattern 3. Locate one against the inside and outside of each wheel. Nail each to floor
with two 60-D, three 40-D and one 20-D nail in heel and one 40-D nail in each side of block.
D
10
4 in. x 8 in. x 24 in. Alternate in tiers of two, lengthwise and crosswise, as shown under front end
of cart. Nail lower pieces to floor with four 60-D nails and upper pieces to those below with
four 60-D nails.
E
1
2 in. x 4 in. x 24 in. Locate on top of Items "D", under front end of cart, as shown.
F
2
2 in. x 6 in. x 16 in. Locate one against outside of each bottom outside Item "D" and nail to floor
with five 40-D nails.
G
1
2 in. x .050 in. high tension band, length to suit. Pass over top of frame at front end, underneath
and around Items "F" and nail to floor with two 40-D nails at each location.
See General Rules 4, 5, 7, 9, 14, 15, 19-B and Fig. 1-B for further details.
F-7
