Sec. 4-Fig. 38
COMPRESSORS, WITH OR WITHOUT PNEUMATIC TIRES-FLAT CARS
Item No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2., Sec. 1.
B
2 ea. wheel.
6 in. x 8 in. x 24 in. blocks. Nail heel of block to floor with five 40-D nails.
C
1 ea. wheel.
2 in. x 4 in: x 24 in., each to consist of two pieces. Nail lower piece to floor with three 40-D nails
and nail top piece to the one below with three 40-D nails. Locate either inside or outside of
wheels.
D
1 ea. wheel.
6 strands, No. 11 ga. wire. Pass around spokes on top of hub and through stake pocket directly
below and twist taut with bolt or rod. If stake pocket is not located directly below hub of wheel,
each end of wire must be attached to adjoining stake pockets and twisted taut with bolt or rod.
Brake and clutch must be tightly set.
See General Rules 4, 5, 9, 14 and 15 for further details.
F-61
