TM 55-2210-223-12
TO 45A2-2-14-41
4-24. HEATER LINES, HOSES, AND FITTINGS (cont)
INSTALLATION (cont)
40.
Install hose clamps (97) on flexible hose (98) and install flexible hose. Tighten clamps
41.
Position plate (104) on engine and install gasket (105), four lockwashers (96), and bolts (95).
42.
Install nipple (94), union (92), and nipple (93).
43.
Install two hose clamps (90) on flexible hose (91). Install nipple (89) and install flexible hose on nipple. Tighten
one clamp to secure flexible hose.
44.
Install valve (88), nipple (87), 90-degree elbow (86), piping (85), 90-degree elbow (84), piping (83), 90-degree
elbow (82), piping (81), and 90-degrees elbow (80).
45.
Install two reducers (77) in tee (76).
46.
Install nipple (79) in 90-degree elbow (80), and install tee (76) and reducers (77).
47.
Install nipple (75) 90-degree elbow (74), nipple (73), 90-degree elbow (72), nipple (71), 45-degree elbow (70),
piping (69), 90-degree elbow (68), piping (67), 90-degree union (63), nipple (66), valve (65), and welded flange
and nipple assembly (64).
48.
Install nine clamps (62), bolts (61), lockwashers (60), and nuts (59).
49.
Install two clamps (58), bolts (57), lockwashers (56) and nuts (55).
50.
Install two hose clamps (48) on flexible hose (54).
51.
Install 90-degree elbow (52), nipple (53), piping (51), 90-degree elbow (50), and nipple (49).
52.
Install flexible hose (54) and tighten hose clamps (48).
53.
Install clamps (47), bolt (46), lockwashers (45), and nuts (44).
54.
Install 90-degree union (38), pipe (39) tee (40), 90-degree elbow (43), pipe (42), nipple (41), and plate (32).
55.
Position gasket (33) on plate, (32) and install plate on engine. Install four lockwashers (31) and bolts (30).
56.
Install two clamps (37), bolts (36), lockwashers (35), and nuts (34).
57.
Install piping (29), 90-degree elbow (28), nipple (27), valve (26), and nipple (25).
4-60
