TM 55-2210-223-12
TO 45A2-2-14-41
4-26. SANDER CONTROL VALVE
This task covers:
a.
Test
b.
Removal
c.
Installation
INITIAL SETUP:
Tools
Material/Parts
Tool kit SC4940-97-CL-E16
Antiseize tape (Item 21, Appendix E)
TEST
WARNING
·Remove rings, bracelets, wristwatches, and neck
chains before working around the locomotive.
Jewelry can catch on equipment and cause injury,
or may short across an electrical circuit and cause
severe burns or electrical shock.
·High voltage is used in the operation of equipment.
Do not be misled by the term LOW VOLTAGE.
Potentials as low as 50 volts may cause death.
1.
Check switches, wiring, and breakers for proper operation.
2.
Remove wiring cover and test valve with multimeter.
3.
Check air cutout for proper operation.
4-65