TM 55-2210-223-34
TO 45A2-2-14-22
3-28. MAGNETIC REVERSER SWITCH (cont)
DISASSEMBLY
3.
Remove eight screws (5), lockwashers (6), flat washers (7), and two transfer bars (8).
4.
Push ends of two plastic covers (9) and remove.
5.
Remove two return springs (10).
6.
Remove two allen-head screws (11), lockwashers (12), movable hold-on irons (13), and movable contacts (14).
7.
Remove three allen-head screws (15), lockwashers (16), flat washers (17), and top terminal assembly (18).
8.
Tag and remove wires from magnetic assembly (22).
9.
Remove two allen-head screws (19), lockwashers (20), flat washers (21), and magnet assembly (22).
10.
Remove allen-head screws (23), lockwashers (24), and flat washer (25).
11.
Remove interlock assembly (26), insulator (27), and armature and operator assembly (28) from bottom terminal
and limit switch assembly (29).
3-96
