TM 55-2210-223-34
TO 45A2-2-14-22
3-28. MAGNETIC REVERSER SWITCH (cont)
DISASSEMBLY (cont)
12.
Disassemble top terminal assembly (18) by the
following:
a.
Remove eight allen-head screws (30),
lockwashers
(31),
and
four
contact
assemblies (32).
b.
Remove eight stationary contacts (33)
and four spacers (34).
c.
Remove eight caps (35), pivot springs
(36), and wipe springs (37) from top
terminal (38).
13.
Disassemble magnet assembly (22) by the following:
a.
Remove allen head screw (39), lockwasher (40), and pole plate (41).
b.
Remove magnet coil (42) and spring washer (43) from magnet yoke (44).
14.
Disassemble bottom terminal and limit switch assembly (29) by the following:
a.
Remove screw (45), flat washer (46), clamp (47), sleeve (29), and rectifier assembly (49).
b.
Remove two nuts (50), lockwashers (51), flat washers (52), and screws (53).
c.
Tag and disconnect wires from back of limit switch (60). Remove capacitor (54) and wiring harness (55).
3-97