TM 55-2210-223-34
TO 45A2-2-14-22
3-35. EXCITER-AUXILIARY GENERATOR ASSEMBLY (cont)
DISASSEMBLY (cont)
12.
Remove six bolts (22), lockwashers (23), outer bearing housing (24), and gasket (25). Remove eight bolts (26)
and lockwashers (27). Rotate exciter end housing (28) and remove exciter end housing from generator.
13.
Install puller in inner bearing housing (34) and remove oil slinger (29), bearing assembly (30), inner race (31),
bearing spacer (32), gasket (33), and inner bearing housing.
14.
Remove six bolts (35), lockwashers (36), auxiliary end cap (37), and gasket (38).
15.
Remove eight bolts (39), lockwashers (40), and auxiliary end housing (41).
16.
Remove two setscrews (42) and locknut (43).
17.
Install puller in inner bearing housing (47) and remove bearing assembly (44), inner race (45), gasket (46), and
inner bearing housing.
3-120
