TM 55-2210-223-34
TO 45A2-2-14-22
3-23. STARTING CONTACTOR (cont)
DISASSEMBLY (cont)
6.
Remove four arc boxes (14).
7.
Remove plunger (15) from stationary contact assembly (16).
8.
Remove main spring (17), two screws (18), plunger guide (19), plunger (20), and spring (21).
9.
Remove two snaprings (22), washer (23), spring (24), and movable contacts (25) from plunger (20).
10.
Remove four stationary contacts (26).
11.
Remove four screws (27) and stationary contact assembly (16) from coil assembly (28).
12.
Remove insulating plate (29) from stationary contact assembly (16).
13.
Remove jamnut (30), lockwasher (31), and stop core (32) from coil assembly (28).
14.
Remove coil (33), insulating washer (34), and spring washer (35) from coil assembly (28).
15
Remove two screws (36), lockwashers (37), and guide pins (38).
3-72
