TM 55-2210-224-12
4-34. BATTERY CHARGING ALTERNATOR BELTS
This task covers:
a.
Inspection
b.
Removal
c.
Installation
d.
Adjustment
INITIAL SETUP
Tools
Tool kit SC4940-97-CL-E16
INSPECTION
1.
Inspect belts for cracks, wear, and looseness.
REMOVAL
2.
Remove bolt (1), lockwasher (2), bolt (3),
lockwasher (4), and flat washer (5). Remove
guard (6).
3.
Loosen nut (7) and bolt (8).
4.
Push alternator (9) in toward engine and remove
two belts (10).
INSTALLATION
NOTE
If one belt is damaged, both belts
should be replaced as a matched set
so tension adjustment will be equal.
5.
Position belts (10) around engine pulley and
alternator (9) pulley. Tighten bolt (8) and nut
(7).
6.
Position guard (6) and install flat washer (5),
lockwasher (4), bolt (3), lockwasher (2), and bolt
(1).
ADJUSTMENT
7.
For proper adjustment of belts, refer to TM 5-
2815-233-14.
4-87
