TM 55-2210-224-12
4-36. EXHAUST MUFFLER AND EXTENSION PIPE (cont)
REMOVAL (cont)
4.
Remove eight nuts (8), lock-washers (9), bolts
(10), and gasket (11).
5.
Remove nut (12), lockwasher (13), screw (14),
screw (15), lock-washer (16), flat washer (17),
screw (18), and screen (19).
6.
Remove nut (20) and remove clamp (21) and
extension pipe (22).
7.
Remove nut (23) and remove rain cap (24).
8.
Remove nut (25), lockwasher (26), capscrew
(27), and clamp (28).
9.
Remove six bolts (29) and lockwashers (30) and
remove housing (31).
10.
Remove four nuts (32), lock-washers (33), and
bolts (34). Remove two muffler clamps (35) and
muffler (36) from bracket (37).
INSTALLATION
11.
Position muffler (36) in bracket (37) and install
two muffler clamps (35), four bolts (34),
lockwashers (33), and nuts (32).
12.
Position housing (31) in place and install six
lockwashers (30) and bolts (29).
13.
Install clamp (28), capscrew (27), lockwasher
(26), and nut (25).
14.
Install rain cap (24) and install nut (23).
4-92
