TM 55-2210-224-12
4-37. FUEL SYSTEM LINES AND FITTINGS (cont)
ASSEMBLY AND INSTALLATION
NOTE
Apply antiseize tape to all pipe threads before installing.
11.
Position fuel filters (22) and (21) on bracket (23) and install four lockwashers (20) and capscrews (19).
12.
Install 90-degree elbows (18) and (17) on filters (21) and (22). Position hose (16) and connect two fuel line
fittings (15).
13.
Install nipple (14), check valve (13), and male adapter (12).
14.
Position hose (11) and connect two fuel line fittings (10).
15.
Position hose (9) and connect two fuel line fittings (8).
16.
Install two clamps (7), lockwasher (6), and nuts (5).
17.
Install clamp (4), screw (3), lockwashers (2), and nut (1).
18.
Refer to TM 5-2815-233-14 for instructions on priming of fuel system.
19.
Start the locomotive (para 2-10 and 2-11) and check fuel lines and fittings for leakage.
4-96