TM 55-2210-224-12
4-38. COOLING SYSTEM HOSES AND CLAMPS (cont)
REMOVAL (cont)
3.
Loosen four hose clamps (5) and remove two hoses (6) and pipe (7).
4.
Loosen four hose clamps (8) and remove two hoses (9) and pipe (10).
5.
Loosen four hose clamps (11) and remove two hoses (12) and pipe (13).
6.
Separate union (14) and remove pipe (15), nipple (16), 90-degree elbow (17), nipple (18), 90-degree street elbow
(19), drain cock (1), and nipple (20) from radiator (21).
INSTALLATION
NOTE
Apply antiseize tape to all pipe threads before installation.
7.
Install nipple (20) in radiator (21) and install drain cock (1), 90-degree street elbow (19), nipple (18), 90-degree
elbow (17), nipple (16), pipe (15), and union (14).
8.
Install pipe (13), four hose clamps (11), and two hoses (12). Tighten clamps.
9.
Install pipe (10), four hose clamps (8), and two hoses (9). Tighten clamps.
10.
Install pipe (7), four hose clamps (5), and two hoses (6). Tighten clamps.
11.
Install pipe (4), four hose clamps (2), and two hoses (3). Tighten clamps.
12.
Close drain cock (1) and add proper mixture of coolant to cooling system.
4-98
