TM 55-2210-224-12
4-39. COOLING FAN BELTS
This task covers:
a.
Inspection
b.
Removal
c.
Installation
d.
Adjustment
INITIAL SETUP
Tools
Tool kit SC4940-97-CL-E16
INSPECTION
1.
Inspect belts for cracks, wear, and looseness.
REMOVAL
2.
Remove two bolts (1), lockwashers(2), and nut
(3). Remove guard (4).
3.
Remove four capscrews (5), lock-washers (6),
and flat washers (7). Remove adjusting screw
(8).
4.
Move fan pulley (9) away from engine and
remove three belts (10).
INSTALLATION
NOTE
If one belt is damaged, both belts
should be replaced as a matched set
so tension adjustment will be equal.
5.
Position three belts (10) around engine pulley
and fan pulley (9).
6.
Position fan pulley (9) against engine and install
four flat washers (7), lockwashers (6), and
capscrews (5). Install adjusting screw (8).
ADJUSTMENT
7.
For proper adjustment of belts, refer to TM 5-
2815-233-14.
8.
Position guard (4) and install nut (3), two flat
washers (2), and bolts (1).
4-99
