TM 55-2210-224-34
3-23. CRANKING CONTACTOR (cont)
DISASSEMBLY
3.
Remove capscrew (4), lockwasher (5), and flat washer (6). Remove arc chute (7).
4.
Remove allen-head screw (8), lockwasher (9), and flat washer (10). Remove stationary contact tip (11).
5.
Remove two capscrews (12) and cover (13).
6.
Remove two capscrews (14), lockwashers (15), and flat washers
(16). Remove stationary contact tip support (17).
7.
Remove allen-head screw (18), lockwasher (19), and flat washer (20). Remove movable contact tip (21).
8.
Remove two capscrews (22) and lockwashers (23). Remove shunt (24).
3-79
