TM 55-2210-224-34
3-23. CRANKING CONTACTOR (cont)
DISASSEMBLY (cont)
9.
Remove calibrating screw locknut (28) and calibrating screw (25), flat washer (26), spacer (27), cali
brating screw
locknut, star washer (29), and calibrating spring (30).
10. Remove cotter pin (31), spring seat (32), and contact pressure spring (33). Remove two capscrews (34),
lockwashers (35), pins (36), clamps (37), and flat washers (38). Remove contact lever (39).
11. Remove capscrew (40), lockwasher (41), and flat washer (42). Remove armature (43) and contact assembly (44).
12. Remove two capscrews (45) and lockwashers (46). Remove interlock (47) and armature stop (48).
13. Remove two capscrews
(49), lockwashers (50), and operating coil (51). Remove two capscrews (52), lockwashers
(53), flat washers (54), and magnet frame (55) from base (56).
3-80
