TM 55-2210-224-34
3-24
POWER CONTACTOR (cont)
DISASSEMBLY (cont)
9.
Remove two capscrews (33), lockwashers (34), clamps (35), flat washers (36), and pin (37). Remove contact lever
(38) and armature (39).
10. Remove nut (40), lockwasher (41), capscrew (42), clamp (43), two capscrews (44), lockwashers (45), flat washers
(46), insulating block (47), insulator (48), and top contact holder and blowout coil (49).
11. Remove two capscrews (50), lockwashers (51), flat washers (52), insulating block (53), and magnet frame
(54) with
operating coil (55) from base (56).
12. Remove capscrew (57), lockwasher (58), and flat washer (59) and separate magnet frame (54) and operating coil
(55).
3-91