TM 55-2210-224-34
4-7.
COOLING RADIATOR (cont))
CLEANING,INSPECTION, AND REPAIR (cont)
WARNING
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Do
not direct compressed air against skin. Use goggles or full face shield.
11.
Use compressed air and blow out each core tube. Rinse with clean water.
12.
Visually examine core for cracks, breaks, or other damage.
13.
Refer to paragraph 3-40 and perform a leak test.
14.
Use duckbill pliers and straighten bent core fins. Use tin alloy solder to repair leaks in core fins.
ASSEMBLY
15.
Position core (25) and install two long header bars (24), short header bars (23), gasket (22), and top header tank
(21). Secure with 54 capscrews (20), lockwashers (19), and nuts (18). Install radiator cap (17).
16.
Position two short header bars (15), long header bar (16), gasket (14), and bottom header tank (13). Install 54
capscrews (12), lockwashers (11), and nuts (10).
17.
Position two side members (9). Install 12 lockwashers (8) and capscrews (7).
18.
Position core guard (6) and install eight capscrews (5) and nuts (4)
19.
Position shroud (3) and install eight capscrews (2) and nuts (1).
4-8
