TM 55-2210-224-34
4-9.
DIESEL ENGINE
This task covers:
a.
Removal
b. Installation
INITIAL SETUP
Tools
Personnel Required
Tool kit SC4940-97-CL-E12
3
Suitable lifting device
Equipment Condition
Reference
Condition Description
Para 3-7
Engine hood removed
Para 3-37
Main generator disconnected from engine
Para 3-40
Cooling fan removed
TM 55-2210-224-12
Fuel lines removed from engine
TM 55-2210-224-12
Heater lines and fittings removed from engine
Para 4-10
Motor mounts disconnected from engine
REMOVAL
NOTE
Before removing diesel engine, check that water and oil have been drained and
battery switch is set to OPEN position.
1.
Prepare left side of diesel engine for removal by the following:
a.
Remove screw (1) and lockwasher (2).
b.
Tag and disconnect solenoid valve wiring (3) from terminal strip (4).
c.
Disconnect engine oil pressure gage line (5) from engine block and position line out of the way.
2.
Prepare right side of diesel engine for removal by the following:
a.
Remove two nuts (6) and tag and disconnect wiring (7) from engine alternator (8).
b.
Remove two screws (9) and cover (10) from electrical box (11) on engine water heater and tag and disconnect
wiring (12) and remove conduit (13).
c.
Disconnect capillary tubing (14) from engine water manifold and position tubing out of the way.
4-32
