Sec. 6-Fig. 23
BOATS-MOTOR WHALE-GONDOLA CARS
Item
No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2.
B
4
2 in. x 12 in., length to suit. Locate, as shown and secure each to floor with eight 30-
D nails.
C
8
3 in. x 12 in., length to suit. Locate, as shown, and secure to Items "B" with three 30-
D nails before application of Items "B".
D
8
3 in. x 12 in., length to suit. Locate, as shown, and secure to Items "B" and "C", with
three 30-D nails at each location.
E
16
2 in. x 12 in., length and cut to suit. Locate, as shown, and secure to Items "B" and
"D" with three 30-D nails at each location.
F
8
2 in. x 6 in., length to suit. Locate, as shown, and secure to each Item "C" with three
30-D nails.
G
3
4 in. x 6 in., length equal to outside width of car. Secure each to car sides with 1/2 in.
diameter bolts. Outside Items "G" notched as shown for boat keels. Apply four 5/8
in. diameter split bolts suitably spaced, as shown, through all Items.
H
2
4 in. x 5 in., length to suit. Locate as shown, against ends of car, supported by and
securely nailed to each Item "J" with 1 in. x 4 in. x 12 in. cleats, as shown.
J
6
4 in. x 4 in., length equal to distance from floor to underside of Items "H". Locate, as
shown.
K
12
4 in. x 4 in. x 15 in. Locate, as shown, to secure Items "J" in position and secure
each to floor with three 30-D nails.
L
4
5/8 in. x 6 x 7 steel cable, doubled. Locate, as shown, passed over top of boat,
through floor and Items "N".
M
8
Rubber or other similar padding, as required. Locate under cable, as shown.
N
8
2 in. x 4 in. x 8 in., drille d to match cable holes through floor, located as shown.
When boats do not fill entire space between Items "H" at each end of car, sufficient dunnage must be placed
between Items "H" and ends of car to completely fill vacant space.
See General Rules 4, 5, 9, 11, 14, 15 and 19-A for further details.
E-24
