Sec. 6-Fig. 26 (Rev.-10-1960)
BUOYS, MARINE (BILGED DRUMS)-GONDOLA CARS
Item
No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2.
B
1 ea. top buoy.
No. 10 ga. steel strap, 2 1/2 in. wide, length to suit. Pass one end through ring
of buoy angle weld to angle bolted to top side angle.
C
2 per load.
No. 10 ga. steel strap, 2 1/2 in. wide, length to suit. Locate on each side of top
row and weld at each junction with Items "B". Weld ends to angle bolted to top
end angle.
D
1 ea. end of load.
5/8 in. dia. rod. Form to fit contour of buoy and weld ends to Items "C".
E
1 ea. end of load.
No. 10 ga. steel strap, 2 1/2 in. wide, length to suit. Locate along side of rings
on top of end and next to end buoys, weld to Items "B" at each location and
weld lower end to angle bolted to top end angle.
See General Rules 4, 5, 9 and 15 for further details.
E-28
