Sec. 3-Fig. 21
SHEEPS FOOT ROLLER, LENGTHWISE--FLAT CARS
Item
No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2.
B
6
Blocks, pattern 10. Locate two in front and two in back of drum against feet and one in front of
each Item "D". Nail each to floor with five 40-D nails in heel and one 40-D nail in each side of
block.
0
4
2 in. x 4 in. x 18 in. Locate two against feet on each side of car. Nail lower piece to floor with
three 40-D nails and top piece to the one below with three 40-D nails.
D
2
4 in. x 4 in. x 58 in. Locate one under frame between drum and box at each side of unit.
Toenail each to Items "B" with four 40-D nails.
E
1
1 in. x 6 in. x 60 in. Locate about midway between top and bottom of Items "D" and nail to
each Item "D" with three 20-D nails.
F
2
2 in. x 6 in. x 60 in. Locate on floor against boxes. Nail lower piece to floor with eight 40-D
nails and top piece to the one below with eight 40-D nails.
O
2
Each to consist of six strands No. 7 gage wire. Locate, as shown, on each side of unit attached
to frame and passed through stake pocket.
See General Rules 4, 5, 7, 9, 14, 15 and Fig. 1-B for further details.
F-14
