TM 55-2210-223-34
TO 45A2-2-14-22
3-30. BATTERY CHARGING AMMETER SHUNT (cont)
INSTALLATION
11.
Install bolt (17).
12.
Install shunt (16) on stud.
13.
Install wires (15) and secure with two flat washers (14), lockwashers (13), and screws (12).
14.
Install flat washer (11).
15.
Install wires (10), (9), (8), and (7) and secure with lockwasher (6), nut (5), and locknut (4).
16.
Install lower rear access panel (3) and secure with eight lockwashers (2) and bolts (3).
17.
Connect positive lead to battery and remove tag.
3-106
