TM 55-2210-223o34
TO 45A2-2-14-22
3-32. HEADLIGHT RESISTORS (cont)
REMOVAL (cont)
TEST
6.
Use a multimeter and perform a resistance test on the headlight resitors. The six 12-inch (305 mm) resistors are
8 ohms. If these readings are not obtained, replace defective resistors.
INSTALLATION
7.
Install resistor (8) and mica washers (7) and (5). Secure with screw (6) and locknut (4).
8.
Repeat step 7 and install five more headlight resistors.
9.
Connect wiring.
10.
Close resistor cage door (3) and secure with two flat washers (2), screws (1).
3-110