TM 55-2210-223-34
TO 45A2-2-14-22
3-33. CONTROLLER MECHANISM (cont)
ASSEMBLY
20.
Install resistor RE53 (16) and secure with two tie straps (15).
21.
Install screw (14), mica washer (13), resistor RE50 (7), mica washer (12) into bracket (10) and secure with nut
(11).
22.
Connect wires from resistor RE50 and RE53 and remove tags.
23.
Install bracket (10), two lockwashers (9), and screws (8).
24.
Install switch (6), two lockwashers (5), and screws (4).
INSTALLATION
25.
Install controller mechanism (3) into control stand and secure with eight screws (2).
26.
Connect wire jumpers between RE50 (7) and RE53 (16) and remove tags.
27.
Install panel light (1).
28.
Connect wiring harness to controller mechanism (3) and remove tags.
3-114
