TM 55-2210-223-34
TO 45A2-2-14-22
4-9.
ENGINE ASSEMBLY (cont)
INSTALLATION (cont)
9.
Install 28 engine mount bolts (43) and washers (44) to left and right sides of engine skid.
10.
Install left side (fireman side) of diesel engine by the following:
a.
Install radiator hose (41) and two clamps (40).
b.
Connect two temperature sending units (42).
c.
Install clamp (35) and secure cab heater hose (34).
d.
Connect engine heater harness (33).
e.
Install eight coupler bolts (31) and lockwashers (32).
f.
Install shroud (30), four lockwashers (29), and shroud mount bolts (28).
g.
Connect radiator overflow hose (36). Install clamp (39), lockwasher (38), and bolt (37).
h.
Connect engine heater drain valve (27).
i.
Connect oil pan drain hose (26).
11.
Install right side (engineer's side) of diesel engine by the following:
a.
Install four washers (24) and bolts (23) on pump housing (25).
b.
Connect oil pressure warning switch (22).
c.
Connect oil pressure safety switch (21).
d.
Connect air control line (20).
e.
Connect water pump drain pipe (19).
f.
Connect emergency fuel shutdown harness (18) and remove tags.
g.
Connect injector fuel return line hose (15) and install bolt (16) and clamp (17).
h.
Connect fuel line (13) to fuel transfer pump (14).
i.
Install fuel filter canister (12), two lockwashers (10), bolts (9), and nuts (11).
4-31
