TM 55-2210-223-34
TO 45A2-2-14-22
4-10.
MOTOR MOUNTING FRAME (cont)
INSPECTION
5.
Check that springs have not rusted, become distorted, or taken a permanent set. Replace damaged springs.
6.
Inspect motor mounting frame (4) for cracks and breaks, and that mounting bolt holes are not out of round.
INSTALLATION
7.
Install cork gasket (5) onto locomotive deck.
WARNING
Components of this locomotive are heavy and may be awkward to handle. Use correct lifting procedures
indicated lifting devices, and/or assistance from other personnel to avoid injury.
8.
Attach a suitable lifting device to motor mounting frame (4) and install motor mounting frame onto deck.
9.
Install 10 springs (3) and flat washers (2). Secure with 10 nuts (1).
10.
Tighten nuts (1) until spring is compressed to 3/4 inch (19.05 mm).
4-34
