ENGINE ASSEMBLY (cont) - TM-55-2210-223-34

ENGINE ASSEMBLY (cont) - TM-55-2210-223-34_304

ENGINE ASSEMBLY (cont) - TM-55-2210-223-34_306

TM-55-2210-223-34 Locomotive Diesel-Electric 06-1/2-Inch Gage 60 Ton 000HP 0-4-4-0 Wheel Model RS-4-TC-1A NSN 2210-01-158-2978 Manual
Page Navigation
297

TM 55-2210-223-34 TO 45A2-2-14-22 4-9. ENGINE ASSEMBLY (cont) REMOVAL (cont) e. Disconnect engine heater harness (33). f. Remove clamp (35) and disconnect cab heater hose (34). g. Disconnect radiator overflow hose (36). Remove bolt (37), lockwasher (38), and clamp (39). h. Remove two clamps (40) and radiator hose (41). i. Disconnect two temperature sending units (42). 3. Remove 28 engine mount bolts (43) and washers (44) from left and right sides of engine skid. 4. Station a person on each side of locomotive to observe lifting operation and to check that no binding occurs. Use taglines to steady engine. WARNING Components of this locomotive are heavy and may be awkward to handle. Use correct lifting procedures indicated lifting devices, and/or assistance from other personnel to avoid injury. NOTE The engine has its own lifting eyes. 5. Use a suitable lifting device and lift diesel engine from locomotive. Lower to ground and set on a suitable support device. 6. Refer to TM 5-2815-232-14 for disassembly, repair, and assembly of diesel engine. INSTALLATION 7. Station a person on each side of locomotive to observe installation operation and to check that no binding occurs, use taglines to steady engine. WARNING Components of this locomotive are heavy and may be awkward to handle. Use correct lifting procedures indicated lifting devices, and/or assistance from other personnel to avoid injury. CAUTION Care should be taken when lifting engine to prevent damage to other components. 8. Use a suitable lifting device and lift diesel engine above locomotive. Slowly lower to deck. 4-30

Privacy Statement
Press Release
Contact