TM 55-2210-224-12
4-19. ELECTRICAL EQUIPMENT CABINET DOOR
This task covers:
a.
Removal
c.
Cleaning
e.
Repair
g.
Installation
b.
Disassembly
d.
Inspection
f.
Assembly
INITIAL SETUP
Tools
Material/Parts
Tool kit SC4940-97-CL-E16
Drycleaning solvent (Item 23, Appendix E)
Welding machine 3432-00-893-3743
REMOVAL
WARNING
o
Remove rings, bracelets, wristwatches,
and neck chains before working around
the locomotive. Jewelry can catch on
equipment and cause injury, or may
short across an electrical circuit and
cause severe burns or electrical shock.
o
High voltage is used in the operation
of equipment. Do not be misled by the
term LOW VOLTAGE. Potentials as low
as 50 volts may cause death.
NOTE
Maintenance procedures are the same
for both doors. There is no latch
assembly on adjoining door.
1.
Remove two pins (1) and remove door (2).
DISASSEMBLY
2.
Remove spring (3) and flat washer (4)
and remove latch bar (5) from guide loops (6).
3.
Remove cotter pin (7), nut (8), flat washer (9), and latch lever (10).
4.
Remove door handle (11).
4-49
