TM 55-2210-224-12
4-20. SAFETY WARNING BELL ASSEMBLY
This task covers:
a.
Removal
c.
Cleaning
e.
Repair
g.
Installation
b.
Disassembly
d.
Inspection
f.
Assembly
INITIAL SETUP
Tools
Material/Parts
Tool kit SC4940-97-CL-E16
Antiseize tape (Item 25, Appendix E)
Drycleaning solvent (Item 23, Appendix E)
REMOVAL
NOTE
Make sure bell switch is in OFF
position.
1.
Disconnect air line fitting (1) and remove male half union (2).
2.
Remove nut (3), flat washer (4), and bell assembly (5) from bracket
DISASSEMBLY
3.
Remove bell (7). Remove cotter pin (8) and pin (9). Remove
4.
Loosen jamnut (11) and setscrew (12).
Remove clevis (13) and separate motor (14) and motor housing
4-51
