TM 55-2210-224-34
3-27. WHEEL SLIP RELAY(Cont)
DISASSEMBLY
3. Remove two capscrews (5), lockwashers (6), and flat washer (7). Remove support block assembly (8).
4. Remove two capscrews (9), lockwashers (10), armature (11), spring seat assembly (12), and springs (13).
Remove nut (14), lockwasher (15), and stud (16) from spring seat (17).
5. Remove capscrew (18) and lockwasher (19). Separate operating coil (20) and magnet frame (21).
6. Disassemble support block assembly (8) by the following:
a.
Remove three nuts (22), l
ockwashers (23), and flat washers (24). Remove normally closed finger (25).
b.
Remove three nuts (26), lockwashers (27), and flat washers (28). Remove normally open finger (29).
3-111
