TM 55-2210-224-34
3-9.
HORN ASSEMBLY OPERATING VALVE (cont)
REMOVAL
NOTE
Handle may have to be removed for
disassembly or assembly.
5.
Disconnect two air line fittings (4).
6.
Remove two nuts (5), lockwashers (6), capscrews
(7), and horn assembly operating valve (8).
7.
Remove two elbows (9).
INSTALLATION
8.
Apply antiseize tape on two elbows (9) and install
elbows in horn assembly operating valve (8).
9.
Position horn assembly operating valve (8) in
control cabinet and install two capscrews (7),
lockwashers (6), and nuts (5).
10.
Connect two air line fittings (4).
11.
Perform steps 1, 3 and 4 above.
12.
Position gasket (3) and cover (2) on control
cabinet and install eight screws (1).
3-37