TM 55-2210-223-34
TO 45A2-2-14-22
3-16. SANDER CONTROL VALVE (cont)
DISASSEMBLY (cont)
6.
Remove exhaust nut (12), O-ring (13), field
yoke (14), and coil (15).
7.
Remove three terminal insulators (16).
8.
Remove coil pole (17), spring (18), plunger body
(19), and plunger seat (20). Discard plunger
seat.
9.
Remove plunger spacer (21), plunger seat (22),
and plunger cap (23) from solenoid valve body
(24). Discard plunger seat.
10.
Remove and discard O-rings (25) and (26).
11.
Remove four screws (27) and lockwashers (28).
12.
Remove actuating cap (29), O-rings (30) and
(31), and rubber cup (32). Discard O-rings and
rubber cup.
13.
Remove actuating piston (33), O-ring (34),
neoprene valve seat (35), and piston stem (36).
Discard O-rings.
14.
Remove two plunger bodies (37), two plungers
(38), and two O-rings (39). Discard O-rings.
3-52
