TM 55-2210-224-34
3-28. REVERSER (Cont)
DISASSEMBLY (cont)
19. Remove four nuts (89), lockwashers (90), flat washers (91), flat washers (92), bolts (93), and spacers (94).
20. Remove two bolts (95), lockwashers (96), rod (97), five sleeves (98), and four supports (99).
21. Remove 16 screws (100), lockwashers (101), 8 supports (102), springs (103), seats (104), and fingers (105) from
support barriers (109).
22. Remove top end frame (106) and bottom end frame (107) from shaft (114).
23. Remove thrust bearing (108), sleeve (109), four support barriers (110), three insulators (111), spacer (112), and
sleeve (113) from shaft (114).
3-119
