TM 55-2210-224-34
3-28. REVERSER (Cont)
DISASSEMBLY (cont)
26.
Disassemble magnet valve assemblies (19) and (23) by the following:
NOTE
Magnet valve assemblies are identical and are disassembled in the same manner.
a. Remove cap plug (125), gasket (126), spring
(127), and inlet valve (128).
b. Remove two screws (129), lockwasher (130),
armature guide (131), and armature (132).
c. Remove retaining ring (133)½ coil (134), and
rubber washer (135) from valve stem (138).
d. Remove two screws (136), magnet frame
(137), and valve stem (138) from valve body
(139).
3-121
