TM 55-2210-224-34
3-20.
ENGINE HEATER RECEPTACLE
This task covers:
a.
Test
d.
Cleaning
f.
Repair
h.
Installation
b.
Removal
e.
Inspection
g.
Assembly
i.
Test
c.
Disassembly
INITIAL SETUP
Tools
Material/Parts
Tool kit SC4940-97-CL-E12
Drycleaning solvent (Item 34, Appendix B)
TEST
WARNING
· High voltage is used in the operation of equipment. Do not be misled by the term LOW VOLTAGE.
Potentials as low as 50 volts may cause death.
· Remove rings, bracelets, wristwatches, and neck chains before working around the locomotive.
Jewelry can catch on equipment and cause injury, or may short across an electrical circuit and cause
severe burns or electrical shock.
1.
Open electrical equipment cabinet door and set battery switch to OPEN.
2.
Tag and remove electrical connections from jacket water heater.
3.
Use a multimeter and perform a continuity test on the engine heater receptacle.
3-62