TM 55-2210-224-34
3-20.
ENGINE HEATER RECEPTACLE (cont)
REMOVAL
4.
Remove eight screws (1), cover (2), and gasket (3).
5.
Tag and disconnect wiring (4) from terminal board.
6.
Remove four screws (5) and pull receptacle assembly (6) and gasket (7) from locomotive frame.
DISASSEMBLY
7.
Remove three screws (8) from back of receptacle assembly (6).
8.
Turn receptacle (9) counterclockwise until slots on receptacle housing (10) aline with grooves on receptacle.
Push
receptacle through housing.
9.
Remove three setscrews (11).
10.
Tag and disconnect wiring (4) from receptacle (9). Remove receptacle.
3-63