Sec. 4--Fig. 28 (Rev.--3-1965)
MACHINE WITH BOOM ATTACHED AND NOT EXTENDING BEYOND END OF CAR-FLAT CARS
Item No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2, Sec. 1.
B
2
2 in. x 6 in., length of crawler, inside or outside, nailed to floor with 20-D nails.
C
2
8 in. x 8 in. x 9 ft., cut to fit contour of crawler treads. Secure each to floor with two 5/8 in. dia.,
bolts with nuts and washers.
D
2
8 in. x 8in. x 6ft. 6in.
E
2
8 in. x 8 in. x 4 ft. 6 in.
F
1
6 in. x 6 in., length to suit.
G
2
6 in. x 6 in., length to suit, nailed to Items "F" and "H".
H
1
6 in. x 6 in., length to suit, nailed to Items "G".
J
2
2 in. x 6 in., length to suit, nailed to Items "D" and "G".
K
2
2 in. x 6 in., length to suit, nailed to Items "F", "G" and "H".
L
8
4 in. x 4 in. x 18 in., hardwood cleat, or 1 , in. x 4 in. x 18 in. plate.
M
4
Bolts, 5/8 in. dia., with nuts and washers, through Items "E", "L" and floor.
N
8
Bolts, 5/8 in. dia., with nuts and washers, through Item "C", "D", "L" and floor.
O
VACANT.
P
2
Bolts, 5/8 in. dia., with nuts and washers, through Items "F", "L" and floor.
Q
2
5/8 in. x 6 x 7 steel cable, doubled. Attach to rotating portion of machine, near rear end, and to
opposite stake pockets.
R
2
5/8 in. x 6 x 7 steel cable, doubled. Attach to rotating portion of machine, near front end, and to
opposite stake pockets.
S
6
Stakes, extending 30 in. above floor.
T
1
5/8 in. x 6 x 7 steel cable. Pass through lattice work of three lower sections of boom and secure
to stake pockets.
U
3
8 in. x 8 in. x 9 ft. Toe-nail to floor with 20-D nails.
V
1
5/8 in. x 6 x 7 steel cable. Pass through lattice work of three lower sections of boom nearest
end of car, and secure to stake pockets.
W
2
2 in. x 6 in., length to suit, nailed to floor and Items "Y" with 20-D nails.
X
1
4 in. x 6 in., hardwood, length to suit.
Y
4
4 in. x 4 in., hardwood, length to suit, nailed to Item "X" and floor with 40-D nails.
Z
1
5/8 in. x 6 x 7 steel cable. Pass through lattice work of boom above Item "X" and secure to
stake pockets.
AA
1
4 in. x 4 in., hardwood, length to suit, toe-nailed to floor with 20-D nails.
BB
2
4 in. x 4 in. x 12 in., hardwood. Secure each to Item "AA" with one 5/8 in. dia. bolt, long
enough to pass through Item "AA" and floor.
CC
1
5/8 in. x 6 x 7 steel cable. Pass over top of boom and secure to stake pockets.
Items "AA", "BB" and "CC" required only when boom rests on floor.
For proper location of load on car, see Fig. 34.
*Machines equipped with locking devices, including those with adjustable treads, must have such devices placed
in locked position by shippers.
See General Rules 4, 5, 9, 10, 14, 15, 19, 19-A and 19-B for further details.
F-47
