Sec. 4--Fig. 29
ROTATING SHOVEL, (TRUCK CHASSIS) HAVING PNEUMARIC TIRES-FLAT CARS
Item No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2, Sec. 1.
B 2 ea. front wheel.
6 in. x 10 in. x 12 in., hardwood, length to suit. Locate against wheels and toe-nail each to
2 ea. pr. dual
floor with three 40-D nails.
wheels.
C
2 ea. pr. Items
2 in. x 4 in., hardwood, long enough to extend 1 in. beyond Items "B". Locate on inside and
"B".
outside of wheels and nail each to floor with six 30-D nails.
D
4 ea. pr. Items
2 in. x 4 in., hardwood, long enough to extend 1 in. beyond Items "B". Locate above Items
"B".
"C" and nail 4 in. face to each Item "B" with three 30-D nails.
E
1 ea. Item "B".
2 in. x 4 in., hardwood, length to suit. Toe-nail to Items "B" and floor with two 30-D nails at each
end.
F
1 ea. Item "E".
2 in. x 4 in. x 12 in., hardwood. Locate against each Item "E" and nail to floor with four 30-D
nails.
G
8
Each to consist of six strands, No. 7 gage wire, (cable shaped). Securely attach one end to
spring shackle of machine and opposite end to stake pocket so as to provide effective
angularity. Twist taut.
H
1
To consist of six strands, No. 7 gage wire, (cable shaped). Loop around near end of and pass
through boom and securely attach ends to opposite stake pockets. Twist taut.
J
1
6 in. x 6 in., hardwood, length equal to width of and cut to fit projections underneath cab.
K
4
4 in. x 5 in., hardwood, length to suit, notched to fit under and against Items "J". Nail to Item "J"
and toe-nail to floor with three 30-D nails at each end.
L
2
2 in. x 4 in., hardwood, length to suit. Nail each end to Items "K" with three 30-D nails.
M
2
2 in. x 4 in., hardwood, length to suit. Locate about 18 in. above floor and nail each end to Item
"K" with three 30-D nails.
N
2
1 1/2 in. x 3 in., hardwood, long enough to extend to outside face of Items "O". Locate against
Items "K" and nail each end to floor with six 30-D nails.
O
2
1 1/2 in. x 3 in., hardwood, length equal to distance between inside face of Item "N". Locate
against Items "K" and nail each to floor with six 30-D nails.
For proper location of load on car, see Fig. 34.
Machines equipped with locking devices must have such devices placed in locked position by shippers.
See General Rules 4, 5, 9, 14, 15, 19, 19-A and 19-B for further details.
F-48
